Turning of hardened 100Cr6 bearing steel with ceramic and PCBN cutting tools

Hardened 100Cr6 bearing steel is a difficult material to cut, but with the right tools it can be done relatively easily. In this article, we'll take a look at how to turn hardened 100Cr6 bearing steel with ceramic and PCBN cutting tools.

Turning hardened 100Cr6 bearing steel

Hardened 100Cr6 bearing steel is often used in applications where high wear resistance and long life are required. This type of steel is very difficult to machine, however, due to its high hardness.

So choose the right cutting tools for machining hardened 100Cr6 bearing steel become very important.

Cutting Tools For Turning Hardened 100Cr6 Bearings Steel

When it comes to turning hardened steel, there are two main types of cutting tools that are typically used: ceramic and PCBN. Both of these materials have their own advantages and disadvantages, so it is important to choose the right one for your specific application.

Ceramic cutting tools are made from a variety of different materials, including aluminum oxide and silicon nitride. They are extremely hard and can withstand high temperatures, making them ideal for machining hardened steel. However, they are also very brittle and can break easily if they are not used properly.

PCBN cutting tools are made from polycrystalline cubic boron nitride. They are not as hard as ceramic tools, but they are much more wear-resistant. This makes them ideal for machining softer metals, such as aluminum or brass. However, they can also be used on harder metals, such as stainless steel or tool steel.

PCBN Cutting Tools Turning Hardened 100Cr6 Bearing Steel

PCBN Cutting tools are the most suitable tools for turning hardened 100Cr6 Bearing steel, and SBH130 CBN Grade can turning 100Cr6 with high cutting speed, get good performance and long tool life.

If you are looking for the right cbn grade, please feel free to contact with us.